Get an Extra $10 off

When you spend $100 or more on your first order

Innoscreen Nasal Swab 5 Tests

Price
$19.95

Product Information

Benefits:
  • Provides rapid results within 15 minutes for fast decision making.
  • Made in Australia & included in the Australian Register of Therapeutic Goods - ARTG 336146
  • Simple Home-Use Nasal Self Test Kit. All the necessary materials are included within the kit.
  • Negative test results do not exclude infection with COVID-19 (so face masks, social distancing and good hygiene practice must be maintained)
  • Must be stored between 2º and 30º celsius

Directions:     

1. Unpack the test components. Do not discard the box. Ensure you have all components required. Do not use if they are expired or damaged

2.  Gently blow your nose into a issue to remove excess mucus. Wash your hands with soap and water for at least 20 seconds or use hand sanitizer

3. Remove the test cassette from the pouch and place it on a flat, clean surface. Do not touch the test window.

4. Place the extraction tube on a secure place to avoid spilling of buffer (use the hole on the box or tube stand if provided with your kit). Unscrew the blue cap. Keep the cap aside

5. Open the swab from the end marked peel here and remove swab. Do not touch the swab tip.

6. Gently insert the swab about 1-2cm into RIGHT nostril, rubbing against the nasal wall in a circular motion for at least 5 times for total of 15 seconds. Remove the swab then repeat the process with LEFT nostril.

7. Place the swab into the extraction tube. Break off the swab handle at the break point. Discard the break off handle.

8. Replace the blue cap on the tube. Squeeze the lower part of the tube against the swab tip inside the tube 15 times.

9. Unscrew the white cap of the tube. Invert the tube then gently squeeze the tube to add 3 full drops of solution to the sample well marked “S” on the cassette.

10. Start timer and read results at 15 minutes as per interpreting the results section on this page. Results should not be read after 20 minutes.

    

Warning Disclaimers:

Read instructions on the leaflet.

Test results of this kit are for clinical reference only. It is recommended that a comprehensive analysis of the disease be conducted based on clinical manifestations of patient and other laboratory tests.

 

TGA Reference 

 

More From:

Innoscreen

Barcode:

9354458004433

Out of stock

Frequently Bought Together

Stock Notification

Get notified when this product is available again

We Accept

American Express
Apple Pay
Google Pay
Mastercard
PayPal
Shop Pay
Union Pay
Visa

Speak To Your Pharmacist Now

Recommended for You

Description

Benefits:
  • Provides rapid results within 15 minutes for fast decision making.
  • Made in Australia & included in the Australian Register of Therapeutic Goods - ARTG 336146
  • Simple Home-Use Nasal Self Test Kit. All the necessary materials are included within the kit.
  • Negative test results do not exclude infection with COVID-19 (so face masks, social distancing and good hygiene practice must be maintained)
  • Must be stored between 2º and 30º celsius

Directions:     

1. Unpack the test components. Do not discard the box. Ensure you have all components required. Do not use if they are expired or damaged

2.  Gently blow your nose into a issue to remove excess mucus. Wash your hands with soap and water for at least 20 seconds or use hand sanitizer

3. Remove the test cassette from the pouch and place it on a flat, clean surface. Do not touch the test window.

4. Place the extraction tube on a secure place to avoid spilling of buffer (use the hole on the box or tube stand if provided with your kit). Unscrew the blue cap. Keep the cap aside

5. Open the swab from the end marked peel here and remove swab. Do not touch the swab tip.

6. Gently insert the swab about 1-2cm into RIGHT nostril, rubbing against the nasal wall in a circular motion for at least 5 times for total of 15 seconds. Remove the swab then repeat the process with LEFT nostril.

7. Place the swab into the extraction tube. Break off the swab handle at the break point. Discard the break off handle.

8. Replace the blue cap on the tube. Squeeze the lower part of the tube against the swab tip inside the tube 15 times.

9. Unscrew the white cap of the tube. Invert the tube then gently squeeze the tube to add 3 full drops of solution to the sample well marked “S” on the cassette.

10. Start timer and read results at 15 minutes as per interpreting the results section on this page. Results should not be read after 20 minutes.

    

Warning Disclaimers:

Read instructions on the leaflet.

Test results of this kit are for clinical reference only. It is recommended that a comprehensive analysis of the disease be conducted based on clinical manifestations of patient and other laboratory tests.

 

TGA Reference 

 

More From:

Innoscreen

Barcode:

9354458004433

Browsing history