Description

Replacement cushion for the ResMed AirFit F20 or AirFit F20 for Her full face mask.

The AirFit F20 mask cushion features InfinitySeal™ technology to ensure that the mask moves comfortably with you throughout the night.

Available in small, medium and large sizes.

Feature

How to wear my AirFit F20 Full Face Mask?

Use a mirror and hold the sizing guide to your face. The top of the guide should correspond with the top of your nasal bridge. the lower part of the guide indicates which mask size is best for your face. The size that aligns with the crease below your lower lip will be your recommended fit.

Steps for fitting the AitFit F20

• Step 1 – Unclip the EasyClick™ Magnets.
• Step 2 – With the mask held against your face, pull the headgear over your head. Ensure the top of the mask cushion is sitting comfortably at the top of your nasal bridge. The bottom of your headgear should settle comfortably at the top of your neck – with the top of the headgear sitting on your crown.
• Step 3 – Bring each of the magnets up to meet their corresponding clips on the frame.
• Step 4 – Adjust the tabs on the upper headgear straps.
• Step 5 – Adjust the tabs on the lower headgear straps.
• Step 6 – Connect your device tubing to your mask elbow.
• Step 7 – Connect the elbow to your mask.
• Step 8 – To ensure your fit will work with your therapy: switch on your device and position yourself as if you are to begin therapy (e.g. lying down in bed).
• Step 9 – Adjust your upper straps.
• Step 10 -Adjust your lower straps.
• Step 11 – Do not overtighten as this may cause discomfort.
• Step 12 – Practice reseating your cushion – pull your mask away from your face, allow your cushion to reinflate, and then resettle the inflated cushion so the cushion membrane is sitting at the top of your nasal bridge.

A video guide on how to fit the AirFit 20 Full Face mask 

More from 

Resmed